When everyone talks about psi readings when are you reading it? If you have a variable speed is it on high?low?
I ask because I have likes 1psi reading when on low and 15psi on high. Does this seem to be the "norm". Hoping I shouldn't be seeing more pressure on the low pump setting. My pump is at pool level and half my filter is above water level. All is hard piped 1.5" pvc about 10-12' runs.
Also so when you prime are you doing at high or low setting.
From what I have read I believe i should only run pump on low except when adding Chems then flip to high to help circulate
I ask because I have likes 1psi reading when on low and 15psi on high. Does this seem to be the "norm". Hoping I shouldn't be seeing more pressure on the low pump setting. My pump is at pool level and half my filter is above water level. All is hard piped 1.5" pvc about 10-12' runs.
Also so when you prime are you doing at high or low setting.
From what I have read I believe i should only run pump on low except when adding Chems then flip to high to help circulate