We completed our pool about 2 months ago and I've been using various methods to keep the pool chemistry stabilized. My PB did the initial work, although, I think they just did the basics. They gave me a ton of chemicals during pool school and I've been using them up while also reading this site and the BBB method. The PB only provided me with a basic chemistry testing kit, so I haven't been exactly sure what my numbers looked like. The pool is clear right now and I want to keep it that way.
After receiving the TF-100 kit I tested my water and here's what I found:
FC - 3
CC - 0
PH - 7.5
TA - 100
CH - 280
CYA - 30
Temp - 80
Since the pool was a new startup, I've been using Trichlor pucks initially to get the CYA up. Should I keep doing this for a while longer to try to get the level a little higher. From what I've read these numbers look OK but you don't know what you don't know.
After receiving the TF-100 kit I tested my water and here's what I found:
FC - 3
CC - 0
PH - 7.5
TA - 100
CH - 280
CYA - 30
Temp - 80
Since the pool was a new startup, I've been using Trichlor pucks initially to get the CYA up. Should I keep doing this for a while longer to try to get the level a little higher. From what I've read these numbers look OK but you don't know what you don't know.