Hi, you guys got me going w/ some initial issues and understanding the basics. You guys were getting me to a balanced state on PH and CL and I've got a good handle on that, testing/adjusting daily things are ok on that front I believe. So now I wanted to see if there were any other long term numbers I need to start aiming at to get my pool balanced.
So right now my round of tests showed:
FC - 4.5
CC - 0
PH 7.9
CH - 400
CYA - 35
TA 45
I added a bit Chlorine and Muriatic acid - so I think I'm good on that part.
I looked at the Taylor guidelines a little that came with the test kit and plugged in my values and it shows my saturation index is around .15 which says can be corrosive.
So just looking for some guidance if I need to be worrying about other stuff.
Thanks,
Ray
So right now my round of tests showed:
FC - 4.5
CC - 0
PH 7.9
CH - 400
CYA - 35
TA 45
I added a bit Chlorine and Muriatic acid - so I think I'm good on that part.
I looked at the Taylor guidelines a little that came with the test kit and plugged in my values and it shows my saturation index is around .15 which says can be corrosive.
So just looking for some guidance if I need to be worrying about other stuff.
Thanks,
Ray