I am considering buying the Hayward Aqua Rite AQR15 from Amazon ( Amazon.com : Hayward AQR15 AquaRite Salt Chlorination System for In-Ground Pools up to 40, 000 Gallons : Swimming Pool Chlorine : Patio, Lawn Garden ). I have read over the product manual and DIY installation appears to be pretty easy.
One question: I have a GFI outlet that is connected to my pool pump timer that I want to use to provide power to the Aqua Rite panel. Is this a simple case of using three strands of wire (or Romex or something like that) and attaching to the appropriate connectors inside the panel and then connecting a three prong electrical plug on the other side of the cable? Is there anything that I should beware of if doing this type of wiring?
One question: I have a GFI outlet that is connected to my pool pump timer that I want to use to provide power to the Aqua Rite panel. Is this a simple case of using three strands of wire (or Romex or something like that) and attaching to the appropriate connectors inside the panel and then connecting a three prong electrical plug on the other side of the cable? Is there anything that I should beware of if doing this type of wiring?