After most of the rainy winter now complete I am getting ready to re-balance my pool water.
We had about 40" of rain at the pool here in Northern California for this past rainy season. Depending on when the rain hit I sometimes had the auto cover closed, sometimes I didn't. We had one storm that dumped a ton of water before I put the pump on the cover, so the water on the top of the cover squeezed about 4" of pool water right out the cover vault side...I just let the next storms re-fill the pool for free! Because of this my water chemistry is now a tad diluted compared to last summer. I wanted to double check here just to make sure I am doing this right. This is my first year with a pool.
Current Values:
FC 7.0
CC 0
PH 7.5
TA 80
CH 250
CYA 50
Salt 2600
CSI -.62
I am planning on upping the Calcium Hardness to 300, the CYA to 70, and the salt to 3000.
Is that all I should do???? Thanks!
We had about 40" of rain at the pool here in Northern California for this past rainy season. Depending on when the rain hit I sometimes had the auto cover closed, sometimes I didn't. We had one storm that dumped a ton of water before I put the pump on the cover, so the water on the top of the cover squeezed about 4" of pool water right out the cover vault side...I just let the next storms re-fill the pool for free! Because of this my water chemistry is now a tad diluted compared to last summer. I wanted to double check here just to make sure I am doing this right. This is my first year with a pool.
Current Values:
FC 7.0
CC 0
PH 7.5
TA 80
CH 250
CYA 50
Salt 2600
CSI -.62
I am planning on upping the Calcium Hardness to 300, the CYA to 70, and the salt to 3000.
Is that all I should do???? Thanks!