Hi all,
Been reading the site for a while and have seen some great advice, hoping to get some feedback on circulation/lighting setup.
Suction Side - Skimmer on 2" line and dual main drains on separate 2" line.
Return Side - Planning 4 return jets with single 2" return line, 4 hydrotherapy jets (10 gpm each) on single 2" return line and waterfall (50 gpm) on single 2" return line.
Plumbing for possible future installation - I'm looking to stub out suction and return lines for the possible addition of a spa in the future, the spa would be 7'x7'. Does one suction line and 1 return line suffice or would 2 of each be preferable, 2.5"?
Lighting - I have two Intellibrites for the pool but am debating the best location for the lighting. The lights can either go at each end or on either side of the step/seat inlet (red boxes).
Any input is greatly appreciated.
Been reading the site for a while and have seen some great advice, hoping to get some feedback on circulation/lighting setup.
Suction Side - Skimmer on 2" line and dual main drains on separate 2" line.
Return Side - Planning 4 return jets with single 2" return line, 4 hydrotherapy jets (10 gpm each) on single 2" return line and waterfall (50 gpm) on single 2" return line.
Plumbing for possible future installation - I'm looking to stub out suction and return lines for the possible addition of a spa in the future, the spa would be 7'x7'. Does one suction line and 1 return line suffice or would 2 of each be preferable, 2.5"?
Lighting - I have two Intellibrites for the pool but am debating the best location for the lighting. The lights can either go at each end or on either side of the step/seat inlet (red boxes).
Any input is greatly appreciated.