I am on the edge of insanity. I know there is an easy solution, but I have not found it yet. We have the Omnilogic control system. I want to use the spa in any weather. It never gets that cold here, but occasionally dips in the 20s, but at night around 30-38 is not unusual in the winter. This is when I want to be in a spa. I do not want to hop in hot water when the air temp is about 40. That is just me. I had this conversation numerous time with the PB, and was told no problem. I specifically brought up the issue of freeze control override and mentioned if it was not possible to use it in any weather, then I didn't want a spa, I would get a stand alone hotube and have it "incorporated" in. I was told no problem.
Been try to use it, but the freeze protection will kick it out of spa mode every 15 minutes.
I talked to the PB post installation person and he just kept on telling me about freeze protection mode. I talked to the PB and he said he will get a solution.
Am I the only crazy one that thinks cold weather is spa weather.
Been try to use it, but the freeze protection will kick it out of spa mode every 15 minutes.
I talked to the PB post installation person and he just kept on telling me about freeze protection mode. I talked to the PB and he said he will get a solution.
Am I the only crazy one that thinks cold weather is spa weather.