Hello!
I've been searching around but haven't found much on this - I just bought the 2 wheel pool cleaner, did a fantastic job over my barracuda g3 which was getting stuck on the main drains every few hours. The only thing I've noticed with the poolcleaner is that after a day or two of running, the hose from the cleaner to the return line gets all coiled up from the cleaner doing its circles everywhere which causes the cleaner to hang around one area of the pool because the effective length of the hose is much shorter. Any tips on how to keep the hose fairly straight rather than coiled up with this unit? Seems like a hose swivel or something is needed.
Also, I have to run my variable speed pump at 3000 rpm to get the cleaner even close to the minimum wheel RPM's....is this normal? The pump is a Jandy 2hp epump pro. The plumbing is 2" coming out of the ground near the pump pad, but don't know what it is from the suction port...
Thanks in advance!
I've been searching around but haven't found much on this - I just bought the 2 wheel pool cleaner, did a fantastic job over my barracuda g3 which was getting stuck on the main drains every few hours. The only thing I've noticed with the poolcleaner is that after a day or two of running, the hose from the cleaner to the return line gets all coiled up from the cleaner doing its circles everywhere which causes the cleaner to hang around one area of the pool because the effective length of the hose is much shorter. Any tips on how to keep the hose fairly straight rather than coiled up with this unit? Seems like a hose swivel or something is needed.
Also, I have to run my variable speed pump at 3000 rpm to get the cleaner even close to the minimum wheel RPM's....is this normal? The pump is a Jandy 2hp epump pro. The plumbing is 2" coming out of the ground near the pump pad, but don't know what it is from the suction port...
Thanks in advance!