Hello, I'm in need of some help/advice regarding the pump/motor on my spa { I posted this in the 'Pumping Station' section but didn't get any replies (I think I posted in the wrong area)... So I figured that I'd try here. }
My spa just started sounding really loud recently. The spa manual says to "Clean the suction" and/or "Open both valves", but I'm not quite sure what that is.
I took a video of it so you can hear what it sounds like:
Noisy spa - YouTube
Does anyone know if it's the bearings, motor, belt or maybe I need to "lube" the "O" rings??? If it's the pump, should I replace it?
If anyone has any advice or can help, I'd greatly appreciate it.
Thank you so much in advance.
LM
My spa just started sounding really loud recently. The spa manual says to "Clean the suction" and/or "Open both valves", but I'm not quite sure what that is.
I took a video of it so you can hear what it sounds like:
Noisy spa - YouTube
Does anyone know if it's the bearings, motor, belt or maybe I need to "lube" the "O" rings??? If it's the pump, should I replace it?
If anyone has any advice or can help, I'd greatly appreciate it.
Thank you so much in advance.
LM