We need suggestions if we are doing something wrong. The PB is suggesting using a common pump for water feature, spa, and pool. We are worried that may create problems esp if salt water starts eroding the rocks and we want to cutoff the water feature.
We are in the process of bidding on pool construction and have read through a number of forum posts and pool school, which has been very helpful.
We are planning a build in North Texas (DFW area), pool size is about 88 ft in perimeter ~ 35ft x20 ft, ~15,000 gallons. It will have a separate standard size spa 7ft -8 ft, and about 12 ft of weeping waterfall. The pool is going to have a salt water cell.
Equipment to be installed.
We are in the process of bidding on pool construction and have read through a number of forum posts and pool school, which has been very helpful.
We are planning a build in North Texas (DFW area), pool size is about 88 ft in perimeter ~ 35ft x20 ft, ~15,000 gallons. It will have a separate standard size spa 7ft -8 ft, and about 12 ft of weeping waterfall. The pool is going to have a salt water cell.
Equipment to be installed.
hayward tristar two speed |
single pump for pool, spa, water feature |
Aqua Rite TCl-15 salt cell |
hayward 60 s.q ft D.E filter |
Polaris 280 with booster pump + Xleaf Debri remover |
400k BTU heater for spa |
sundek decking |
tennesse flagstone coping |
STONE SCAPES decking |
no automatic remote (just key pad) |