My question is this. What is everyone doing to combat high water temps (90-94F) and keep your PH in balance. I know that there is no simple or easy way. Otherwise everyone would do it.
Thru reading on this forum and learning from others the process that I know for my situation with a SWG which naturally raises PH is this. My thought process as follows-
Check PH first and lower as necessary to 7.2, then use my homemade fountain to aerate to help cool the water. Then monitor the PH and TA to determine how many hours of aeration I can get before PH gets to high (above 7.8).
Is there anything that I am missing or better solutions? Bathtub water is not very relaxing. Oh BTW my pool gets full sun from 10AM till 8PM. Right now the best swim time for us is after the sun goes down.
Thru reading on this forum and learning from others the process that I know for my situation with a SWG which naturally raises PH is this. My thought process as follows-
Check PH first and lower as necessary to 7.2, then use my homemade fountain to aerate to help cool the water. Then monitor the PH and TA to determine how many hours of aeration I can get before PH gets to high (above 7.8).
Is there anything that I am missing or better solutions? Bathtub water is not very relaxing. Oh BTW my pool gets full sun from 10AM till 8PM. Right now the best swim time for us is after the sun goes down.