I'm hoping someone can give me some advice. We are losing water and it stops just below the skimmer and about halfway down our jet return. The problem is that the ground that's wet on the outside of the pool is roughly 5 ft away from the pump and filter and roughly 1-2 ft away from where our return is. I spent an hour today looking all over the area inside th pool where the ground is wet and see no tear or rip. The seams seemed fine too. No sand noted at the bottom of the pool. My question is, if the leak is in the skimmer or return jet, could the ground get wet that far away from where they're located? Or have I more than likely missed the tear when I checked?