"Numbers":
FC: by color, I would say a 2, even though it's not listed for comparison on the strip results chart, but it's between 1 and 3
TA: 120
pH: 7.8
My other post suggested holding off on the SWG until these got straightened out...
I took a sample to the local pool supply place and found the salt is 5200, which should be 3000...so, my next step is to clean the cell, make sure the pump gives back a "high salt" code then drain and re-fill a bit. Sound like a plan???
On a side note, pool guy said I knew what I was talking about, at least, so that's encouraging...I've learned some stuff since joining!