Hi all im trying to confirm the Salt level in my pool getting a red light on the swg unit a emaux 45g/ph which this error light means not enogh salt /check cell .The unit is not very old been having this problem on and off since i bought it and have blindly added salt untill the light went out .We did have some really heavy rain 2 days ago and the pool over flow was runing over night .I bought a palintest Chloride tester to take the guess work out of it but unfortunatlly the instructions that came with it said use a 2ml sample top up with distilled water to 50ml then add tablets untill it goes from yellow to brown which is pretty straight forward but it tests in 500ppm increments . The spare tablets i bought came with paper saying you can test 100ppm using a striaght 10ml sample but obviously im not going to be able to disolve 40+ tablets in 10 ml sample so i need to up the scale a bit can any point me in the right direction . Living in Thailand i am very limited with what i can use .Thought the swg would be a major bonus running the pool but its been a pain in the arse so far . im concerned it might be running too low as it doesnt seem to be generating the chlorine it is supposed to
Last edited: