power outage

Hi, I had a power outage at my house and now my Pump is turning On and Off by itself. I already turned off the breaker for five minutes and reset the scheduling. The Pump is still turning On and Off by itself. I can’t identify the problem. Any suggestions?

I have a Zodiac eXO iQ LS connected to iAqualink,, no problems there. The problem I am having is that we get the occasional power cut and every time this happens the unit's clock needs to be reset. I manage the pool but travel a lot for work so this is a big issue as soon as the hour is lost the...

New pool owner here! We have a Jandy Flopro VS Pump w/o controller 1.85HP with Aqualink RS. We lose power regularly (once a month at least). When the power comes back we have to manually turn on the power. We were told by the pool builder: If your house loses power then it resets the entire...

Hello! Background: Last year during the Texas “snowmageddon” event my power went out at 2 am and it was well below freezing, near 0 degrees. I went immediately and drained all my equipment. I already had bottles filled w/ rocks in the skimmers to prevent freezing. Four days later when I had...

There was a power glitch and then it stopped working. It is getting power because the LCD screen is lit but won’t do anything else. Checked all breakers. Submitted warranty (not even a month old 😫). Help!

Hey folks! New to posting but I’ve learned lots of cool stuff here! I haven’t found a post like this but if there is a solution somewhere and someone could point me to it that would be great! So here’s the deal: Pentair VS PUMP and Easytouch/Screenlogic installed. All new pool and system May...

Hi, I am in DFW area, temperature was below 10 degree and our power went out overnight(pump was running all the time before outage) I realized outage in the morning, i shut the pump power from breaker, i opened the drain plug of the pump strainer pot and put it back very loose so the water can...