bond beam

Hi all i could use some help, we have a cantilever deck and not traditional coping. The pool was already built before we bought the house. It’s maybe 10-15 years old. We resurfaced it with pebble tec, and 2 years later were noticing a crack underneath the tiles several builders said the pool...

Two years ago, I bought a luxury home that's now draining my savings with constant maintenance costs, causing extreme financial strain. Recently, I noticed issues with the pool deck cracking and suspect the bond beam is cracked, as it lacks a proper extension joint, and the slabs are butting up...

Hello- I am in urgent need of advice. I am currently having pool work done (resurface deck, new tile and plaster). I happened to notice that the contractor filled the space between the top of the bond beam and my cantilever deck (no coping), with cement. I asked him about it, and he confirmed...

I'm getting my bond beam formed today. I'm having my typical last-minute panics with something like this realizing the millions of things I don't know. Here are my questions. 1) should I separate the coping from the concrete on top of the pool wall in case I ever need to change the...

Hello! I own a pool company here in Southern California. I was getting a lot of info about bond beam repair because I think I am ready to offer that as a service. I was curious though, from all of the information I gathered in all my research (while 95% confident I can handle the job and it be...

Hi everyone! I found a leak in my spa and it appears to be from a crack in the bond beam. Removed our tiles (quite a few fell so was planning to DIY and replace them all) and the crack is rather large... nearly across the entire half of the tub. Besides the crack in the bond beam, also...

Hey there! So we bought a house that's got some issues with the pool. We have some leaking, tiles falling off, all softd of fun stuff. We went ahead and removed all the tile and thinset and got down to what i think the bond beam. Pieces were cracked and broke off while using the hammed drill...

We are the new owners of a 40 year completely tiled salt water pool 16x32x 9 foot deep-end semi inground pool that had a ceramic/porcelain tiled cantilever deck. And we live in Canada. Cracked grout on the pool deck resulted in water seeping from the pool deck in-between a section of wall tiles...

hey everyone, first time poster here and hoping I can get some feedback from some of the pool Installers and/or homeowners who know how their bond beam was installed. I’m an architect by trade but pool install is something I’m not familiar with and want to make sure I’m not missing something...

Hello TFP, I love the support I'm reading from all the experienced pool owners. I made an offer on a home built in the 1970s however when the pool was uncovered, we discovered some damage to the tiles and a horizontal crack in the bond beams. Further, when we inspected the home, the seller had...