Search results

Our inground shotcrete pool, which has an automatic cover, has just been finished and we've noticed that there is a persistent gap (of varying width) between the top of the water-line tile and the autocover track above it. The PB and cover company both insists that this gap will not lead to any...

Thanks mas985. I'd want to have this automated with spa activation. If just after the Intelliflo a bypass is installed with a valve actuator, can the "on" spa state of the actuator be set to something other than 100% bypass? (obviously the "off" pool state would be 0% bypass)

The 4 jets powered by the intelliflow are what provide the heated and filtered water. The remaining 8 jets are powered by a 2hp whisperflow (water just circulating to and from the spa, no interacting with the rest of the system). If placed in parallel, regarding reduced pressure on the 4...

I don't think so, only the intellifow would be used when heating/filtering - which woudl allow a low flow rate to be used for that purpose. The whisperflow would only kick in when the jets are activated. This is how things operate now - the main issue being that since the jet circuits are...

We have a spa with 12 jets - 8 managed by a dedicated whisperflow (spa return) and 4 managed by an intelliflow (filter and heater). Even when the intelliflow is at the maximum 3450rpm, those 4 spa jets have maybe half the pressure of the remaining 8. If we replumbed the 2 pumps to be in...