Search results

We have the same pavers in our pool deck and I was told by a few contractors that there needs to be a space between the pavers and the coping so that when the pavers move in a freeze, they don't pop off the coping tiles. They have recommended replacing the pavers with concrete around the pool...

In my setup (Jandy Aqualink RS), there is no sensor in the spa itself. The sensor is in the plumbing right after the pump and before the filter. It is inserted into a hole in the PVC and held with a clamp. It monitors the water circulating through the system when in spa mode (or pool mode)...

Re: IG Spa Leak If your spa is raised so that the water level is above that of the pool, a leaking valve can definitely be the culprit, as stated above. As long as the water is leaking into the pool through the valve and nowhere else, it is not that big a deal. I have had this occur and you...

I never had luck getting this test to work using the container that comes with the Taylor K2006, always got the floating precipitate. I got a 50 mL graduated, screw cap tube (from work) and use that to agitate the solution vigorously after the additions. After you measure the initial volume...

I have a check valves on the return to my raised spillover spa as well as the spa drain and they work pretty well to keep the water in the spa overnight . It is variable and sometimes I lose nothing, sometimes a few inches. I would echo the comment above on the JVAs toggle switches. Go to the...

I just did this repair last night on my 2 year old unit(Aquapure 1400). I bought a "back" pcb board off the internet for about $120 and swapped the boards out. Pretty simple and it did cure the problem. In my case, the error message was sporadic but switching the boards seems to have worked...