Search results

I understand about the off-gassing but it so hard to find the stuff in Houston, I often wonder the actual strength of the stuff I was getting ripped off for at Lowes. Gonna try this and see what happens.

My liquidator works ok, but I am not enamored with the quality of it. I too am trying to put together a dosing system. I have a BubbleMagus BM-T01 pump with three heads which hopefully will do the trick. With the help of another guy in Houston, I was able to get 25 gallons of really good...

It was painful but we got her all covered up now. I used 4 huge tractor tire tubes I bought on Ebay, I think they will have no problem holding air all winter. There is a rope that strings them all together spaced evenly down the center line of the pool (attaches to a recessed tie down on the...

I have a 30 x 15 AGP, oval in shape which is at a weekend home, and nobody takes care of the pool during the week. I leave the pool each Sunday with a mesh cover over it but that doesn't mean small stuff doesn't still get through and fall to the bottom. My routine when we get there on Friday...

Makes sense, now I know why you were confused!!! The city of West, TX has a FAMOUS Kolache place just off the highway. If you make it that way you should stop by....I promise you will not be disappointed.

Do you have a link to such a switch? does it have a timer on it as well as a thermostat switch? I guess what i'm asking is would it take the place of my current timer? I can install myself...I did the rest of it so this shouldnt be that difficult. And during this time period, would I turn...

I dont know what a freeze timer is, can you elaborate? I have a liquidator. oh...and can you send me a Kolache? PUUUHHHLEASE?!?!?!?!? (everyone will think I'm weird)

I have a 30 x 15 AGP in Matagorda County, Texas (in case you want to see where it is geographically) and keep going back and forth as to whether I should do a full "close" or not. Its a weekend home that we will use sporadically from now until the week before Thanksgiving and then we usually...

Trying to think of ways to deal with the water that may collect in the winter cover of my 15 x 30 AGP. does anyone thing that putting a hole in the center, attaching a hose to the hole somehow and running the hose over the edge of the pool would work?

curiosity, How do you keep the water from accumulating on the cover? First winter with my pool and trying to figure out whats best.

Look at my post below at the bottom...ezpz with the right parts. I'm VERY happy with my system. Feel free to pm me if you have specific questions. need-winter-cover-help-for-oval-agp-with-deck-around-half-t68890.html

Re: Need winter cover help for oval agp with deck around hal sorry for the delay, I forgot that I said I would post the pictures! The tie downs and carabiners are all stainless steel and have been recessed into the wood deck so they are 100% flush. I started out by making myself a template so...

Thanks guys!

I am quite sure I used to be able to use a search function on here...where is it?

I have a Pool Rover Jr which I absolutely love. I think for the deal you can get on one on line, they are hard to beat. My question is, has anyone ever retrofitted one with a set of brushes somehow? I am trying to think of a way to add a brush on the front and rear.

x 1000 Myself and all of my neighbors spray and you wont see a single skeeter, ant, roach, nada! You will need to spray no more than a 1/2oz per gallon (I'm actually spraying less than that now) and spray EVERYTHING except for flowering plants and things you intend to eat. Spray half way up...

Re: Need winter cover help for oval agp with deck around hal I had the EXACT same issue. I recessed some Stainless steel cargo tie downs along with some stainless steel carabiners and VOILA. works like a charm. I will post some pictures tomorrow along with the links to the parts you will...

After talking to the fellow at liquidator and finally getting to a point where I now have the liquidator above the level of my pool, and no check valves it seems to be working...I think. Check valves-When I had the check valves in place, basically, the pump wasn't strong enough to get the flow...

and the bottom of yours are just plastic? no feet or pads of any sort? Are they stable?

Secretly I was hoping someone would notice!!! hahaha...especially after all I went through to find out later it was a bad multiport. I have two cinderblocks inside the steps...not the light ones either. They are the old fashioned SUPER heavy concrete ones. The stairs have suction cups on the...

Below is a picture of my wedding cake stairs. The are in stalled properly and look great but I am not all that happy with them. They are pretty wobbly and generally unstable feeling which causes the screws that hold them in to constantly come loose. Does anyone have a better set of stairs...

I just bought a Pool Rover Jr and am pretty happy with it so far. For the money I dont think you can beat it. Does exactly what it says it will do.

Re: Above ground pool at weekend house...5-6 update DECK BOA FINALLY FINALLY FINALLY FINISHED!!!!!!!!....now I just have to run a water line, run some electricity, put a gate on and put up the hog wire. Oh yeah, and CLEAR UP THE DARN POOL WATER. I also have a sound system I'm putting together...

No I haven't...I might give that a try. I just wish I hadn't been so stupid and rinsed the pipe first....would have taken all of 5 minutes extra!!!!!!!!!

I don't think there is any issue with filter...I just think the particles are too small for the filter to filter lol. Anybody else have tips or experience with clarifier???

Let me first start off by saying that I have done some searches and it seems in the right instance and used properly, water clarifier can work. Here is the situation. I re-plumbed my pool to hard PVC pipe because I needed to move the equipment when I started building the deck. I had some 1...

Re: Above ground pool at a weekend house advice...4-22 UPDAT FINALLY FINALLY FINALLY...deck boards!!!!! Pool seems to be pretty stable, I haven't been able to pay too much attention to the cloudiness from the dirty pipe mishap but I do have a Pool Rover Jr coming tomorrow so hopefully I can...

Re: Liquidator... air bubbles in tube, lower PSI at filter & Just about ready to install mine also...not to hijack but does anyone have a way to eliminate the air bubbles? Better clamping system, some sort of sealant, better fittings etc?? I'd be interested in hearing before I set it all up!

Yes, I did...the fellow you'll likely talk to (I think it's Joe) is super nice and pretty helpful. I ordered, paid, it shipped and I received no problem. Now just gotta install it!

Re: Above ground pool at a weekend house advice...4-22 UPDAT Hahaha...somehow I got it!