Search results

It’s set for 15, checked it myself as first thing. Didn’t trust the installer.

I know, I test my own water, I got a TF100, I just wouldn’t want to wait until Monday for my kit to arrive, as I want to use the pool this weekend. Thus thought on going to pool store this one time.

See above

Top of my head, ideal 3200, stops 2600. I got 80lbs, and would need 120lbs according to charts. I think I will just take a sample to pool store, while I don’t like to, but at least they can tell me what they think the salt level is.

Existing pool, switched to SWG, not sure how much the SWG installer added salt, but the Hayward board showed 2800. I don’t think to matters, but it was a week between adding the salt and actually firing up the SWG.

Hi, I finally got my SWG up and running, the Hayward board showed 2800 for salt and this morning it showed 1800 and lights are up due to low salt levels and I need to add more salt for it to operate properly. Is this just a thing at the beginning? The installer had it super high 80% output...

Yeah, or it is stuck on one of my Jandy valves screws. with the identicality, I just meant that I didnt see any difference in the T regarding which way you install it.

If it is in my lines, should I be worried? I didn't see it in my pool yet. My return lines are big enough so it shouldnt get stuck, and all returns are working just fine. Missed your comment on the T. It is Hayward original, I think he just removed the mark. Also, I looked at the replacement T...

Looking at replacement parts, it seems the hole on the flow switch has a plastic puck. I am assuming I should find that in the bottom of my pool? Shouldn’t get stuck in my lines?

Didn’t have the sticker on mine, but I think it is correct. Lookin at your photo the arrow on the head is pointing opposite way, left and flow is to right. On mine the arrow on the head is pointing right.

trying to reply to all your comments, a) yes with the phone cord on, after 30-60seconds the light goes off. c) Yep, I will text the owner now.

I had a hayward pro come by the verify the faulty flow switch and they said it was an installation issue. The installer broke the flow switch apparently. Didn't charge me thank god as I was on his route home and it took him 2mins.

Ok I am back, now the light was flashing, so faulty flow switch, right?

I will just get the plug as well as I found it. https://www.homedepot.com/p/1-2-in-Schedule-40-PVC-Plug-C450-005/100343392 So if both are successful, then issue is the cell I assume. Thanks all, I will report back in few hours.

This is the cheapest actually for telephone cable. Commercial Electric 8 in. Telephone Line Cord, Gray-8IN LPP 4C GR - The Home Depot I tried finding the 1/2" npt plug but I cant find one in HD. should I go and browse the plumbing section? So the cable test would check if my board is the...

First at 2850, second at 3450. Clean the filter? Also regarding your phone plug, don’t have one handy, if I spend $5 and get one from HD, what you mean with twisting? also not handy enough to check for debris, I would assume debris free as new plumbing and new unit.

Left, that is the return from the heat pump.

See above for the VS pump and speeds info. I have the VS pump running at 2850 normally for 4 hours in the morning and 2 hours in the evening and 2100 in between, but the even when I run at override 3450, issue is the same.

Even if I run it at 3450, which is the max, it is still solid red. It's aligned correctly, arrows are pointing to the direction of the flow. It is powered through the main board and controlled through a timer that is set from 10am-5pm. My VS is running currently from 7am-7pm. My VS is not the...

I got the Yes, arrows are pointing the correct direction. I have unplugged and plugged several times, no help.

Hey, I jumped on the Amazon $900 deal on Hayward SWG. I finally got it installed professionally, I installed a heat pump and the company agreed to install the salt gen with no additional cost, with caveat that they are not responsible of any defects on the SWG as I didn’t buy it from them. And...

Ugh, hayward told me to have their service provider to stop by to look at the light, knowing they will ask at least $80 for a service call with a slim chance that they would somehow put it under warranty after 9 years, I think I will just get a new light. Will go with white bulb.

Thanks! Cool, let’s hope for the best.

I just pulled it, they don’t open until tomorrow. But I was planning on calling, so you know how long their warranty is? Can I leave the fixture on the deck overnight/few days without it causing issues?