Search results

Needing some help on the equipment plumbing layout and design. I have 2 2in skimmers that are separated, 2 2in bottom drains that are tied together, 4 1.5in returns tied together with 2in, 4 1.5in bubblers tied together with 2in, 3 3/4in deck jets fed with 1.5in trunk and a 1in for the slide. I...

It’s 52 to the bead receiver but 54 to the top of the wall. I’m starting to think someone has added 3-4in of sand to the floor plus the cove.

Getting ready to order a new pool liner and not sure what size I should order for the wall. Last time I ordered a 54 and had a lot of excess so I thought it was a 48 but apparently that’s very rare to have a 33 x 48 so now I’m thinking my floor may have been too high. Also it was a GLI liner...

The water level under the winter cover started to drop this spring then stopped with about 1ft left in the pool. I pulled the cover this weekend and found the liner had shrunk and was brittle (it was very cheap and was replaced 5 years ago. I then started to remove the liner and found a decent...

I am trying to figure out what is wrong with my spa, I found it today off and the 50a breaker was tripped (not the gfci portion but the actual breaker). Had a storm the night before so I thought maybe that did it so I turned it back on and it tripped again about 5 minutes later. So I turned it...

I was back washing once a day since the water wasn't clear, I will try every 3 days unless you suggest waiting even longer, just didn't want it to get clogged. I certainly didn't pass the OCLT 10:55PM FC=15 CC=.5 now 4:45AM FC=10.5 CC=.5 the chart shows I should be around 12 for shocking...

I normally backwash until the water is clear which normally takes 30-45 sec but the past 2 time I probably back washed for 1min since the glass wasn't ever getting cloudy. I'm working on the CYA I don't want to get it too high so I have been adding stabilizer slowly. I'm going to get some...

Hi, I'm sure I sound like a broken record but I have been reading for hours and am not sure what is going on with my pool. I started with a fresh fill this year after I put my new liner in around may. I have been on the BBB method for the first time and started when I filled the pool. I have...

ok, I will get my CYA up and that should keep me from loosing all my chlorine to the sun each day. My pool is in full sun all day so I would think I would want a CYA of around 50 wouldn't I?

26k and I used about 3lbs

OK, it really was all my fault I wasn't reading the tube right looks like I might have a CYA of 0, I will be adding some stabilizer now.

I just got my tf-100 today and I'm trying to use it for the first time, and I am having some issues. I just put a new liner in my pool 2.5 weeks ago so it is new water, I used triclor for the first 2 weeks and kept my fc right at 2ppm, then I decided to got with the BBB. My fc= 0, PH= 8.2 TA=200...

Ok thanks will post again when the liner is in.

So, I'm making progress on fixing the pool and getting close to putting the liner in. I just wanted to check back here so that people can take a look at what I'm doing to make sure it looks right. I dug out the pool track where it had fallen down due to washout then raised it backup to where...

Thank you for your suggestion, I have it narrowed down between 2 different liner pads. They are within $3 of each other so I'm just wondering which one would be better. What do you all think or do you think they are the same. The "Liner Armor" from Poolsupply world says its only 1/18th of an...

I'm looking at purchasing the Liner Shield and wanted to know if you were happy with the product. Thanks.

I am planing on ordering the liner tonight, and Im still confused on the wall height, from the top of the crushed limestone (bottom of pool wall) to the top of the pool wall (with the top cap removed) is 54. Watsons says a 56in was sold with it but I think it has been changed since then...

I bought a house that already had a pool and had sat in foreclosure for 2.5 years. I found the paperwork for it and double checked with Watsons's, they pulled the invoice and is shows the pool is a Strong Pools Colosseum Riser 33x56 (supposed to be a 54 with at 2in riser but my tape measure...