Search results

  1. M

    Failing Hayward Super Pump 1 HP - Replace motor or upgrade to 3/4 HP Dual speed pump?

    Yes, you are correct my current impeller is a SP2607C! I bought a cheap all in one seal/gasket kit from Amazon, but I'll take your advice and get the PS-3868 seal. The old motor was set to 115v and the pump breaker is a single pole GFC, so I am sure it is 115v. Thanks for pointing me towards...
  2. Capture.JPG

    Capture.JPG

  3. M

    Failing Hayward Super Pump 1 HP - Replace motor or upgrade to 3/4 HP Dual speed pump?

    Just like a few others in the south our pump (Hayward SP2607X10 - Service factor 1.1, running @ 115V) started making a horrible screeching noise once the temps hit 30 degrees. After winterizing the pool in the middle of a winter night (cursing loudly kept me warm) I took the pump apart and it...
  4. M

    Help ID type of light -Can't sync LED pool lights

    No luck. Rapid clicking was the first thing I tried out pure frustration! I did it again, no difference. Thanks for the suggestion!
  5. M

    Inherited a Pool, hard time with pH and SWG % and an FC of 42!

    Awesome info everyone, thanks for all the knowledge! Somehow I am up to a FC of 13 today :hammer: That's with no cover, temps of 91 on a very sunny day, 4 hours of pump time and 30% SWG. There was an unusually low number of leaves and frogs in my skimmer, perhaps the wind wasn't blowing as...
  6. M

    Help ID type of light -Can't sync LED pool lights

    Hey everyone. I inherited a pool with our new home and cannot sync the two multicolor LED pool lights. They are wired together (same low voltage source). I have tried all the protocols I could find for different manufacturers but nothing works. I cannot find similar appearing lights online...
  7. M

    Inherited a Pool, hard time with pH and SWG % and an FC of 42!

    Another question: Now that the chlorine is less concentrated, will the rate of chlorine loss slow down? Is there enough CYA to stabilize the current chlorine concentration (if thats how it works)? Right now with the cover off the pool is losing 5-7 ppm/day since the SWG has been off, which...
  8. M

    Inherited a Pool, hard time with pH and SWG % and an FC of 42!

    Thank you! Yes definitely a T-15 (even says for 40k gallons on the label), a 1 HP pump and 2 inch pipes for a 5900 gallon pool! Overkill but hopefully that means I can keep the run time lower. And yes, I used the 10 mL mark. Thanks, I must have fallen asleep during that lecture in the...
  9. M

    Inherited a Pool, hard time with pH and SWG % and an FC of 42!

    Hello everyone! I am now the "proud" owner of a 2 year old, 5900 gallon in ground, fiberglass, SWG pool. Proud is in quotes because we really did not want a pool (wife can't swim and I despised caring for my parent's pool as a teen). We almost broke our contract because of the pool... but after...