Search results

Hooray! This did the trick but on the opposite heater and relay lead you have shown. Thanks a bunch everyone

This was extremely helpful. I can at least diagnose my problem now before I buy my next batch of parts

how did you jump it? From where in particular? I was going to try that but I was worried my heater wouldn't shut off if I did it from the wrong place, because that's an excellent idea before I order more parts.

So update on the tub, I still haven't gotten much further, but I think I'm going to replace the hi-limit sensor next. If that doesn't work I was hoping someone could point me to a place where I could get my motherboard refurbished for a decent price, since I am unsure if the replacement I am...

Also if the red wire is tested with the white wire or the black wire I get 240v but not with each other

Here is my control board I would assume the relays above the white and black wires would be the correct ones to check for this if that is where I am to go next. I know a good deal about computers and motherboards so I can check for damage to the actual board or capacitors but I am unsure of the...

I'm testing with a volt meter and a multi meter for all of these readings. It is indeed a 240v heater and system and each individual leg is running roughly 120v I'm jus5 not getting my accurate reading crossed the heater. The pressure switch is brand spanking new and has been tested by me while...

I should also mention that my pressure switch is working properly. I get no reading acrossed it when it is running. If need be I can take a picture of my board and post it. If that will help at all. Its a pretty old hot tub so i know some of the stuffis goong to be tough to replace on it. Mostly...

it is my heater and I don't get any reading between the white and black wires at all. but I do get a reading of 118 volts per wire to the main ground

So when you say crossed the element do yoy.mean the total voltage of both hot wires to the ground or around the coils loop itself - - - Updated - - -

I have a Sundance sentry 724 hot tub, yes I know it's a little outdated but I cant afford to buy a new one. Anyway, the heater on this baby stopped working for me a little while ago and I have been pulling out my hair trying to get it up and running again. I replaced the heater and the pressure...