Search results

It did spew like that from the start. I got the new filter in and I now know what the problem was. The split nut would not screw down far enough on the threaded sleeve for some reason. When I would tighten it tighten all the way, and no, it was not cross threaded. I took it off and put it on...

I contacted the company I bought the filter from and they are sending me a new one but I am still curious what the problem could be? The water is coming from beneath the split nut on the valve assembly; in between the split nut and threaded sleeve assembly.

Not in the line. When I select the, to pool, setting it works fine. With the to pool setting it sucks the water up through the skimmer, sends it through the motor and into the filter but it does not go into the sand, it is diverted to the hose that goes to the chlorinator and then the pool.

I am unplugging the pump and moving the handle to the different selection and then plugging it back in.

PSI is 10. I pulled the top off and looked at it and saw nothing cracked. I did not see in the schematic where there would be a missing gasket.

My Waterway sand filter is fine when I direct the water to the pool but when I direct it to the filter it makes a grinding type noise and spews water. I have tried unscrewing and then tightening the cap on the threads multiple times but there is no change.

I got my ground level so now it is time for the pool setup. My pool has a circumference of 27' and I purchased 2 tons of mason sand to create a shallow sand layer but I cannot decided if I want to put the sand over or under the Liner Armor ground liner I purchased? I have read that people have...