Search results

Thx! RE FC, I tend to keep keep it at or slightly above recommended SLAM levels to make sure it never falls below SLAM recommendations. I do this during SLAM in case I miss a morning/evening checking levels during SLAM giving myself reassurance level are adequate at all times of the day during...

24 round Above ground vinyl liner, ~14k gallons, 210T Hayward and 1 hp single speed Hayward pump. I've been doing SLAM for almost 2 weeks and haven't dropped below SLAM levels or higher. In years past, I've seen more improvements in water clarity before now. There is still some debris that...

Our pool cover constantly blows off every year so start ups usually involve leaves/debris in the pool. It would be great to have a.large net like this I could temporarily install until all/most debris.is removed. Curious of others experience with something like this. Has anyone used a skimmer...

Most of that information in the thread provided I had already read. Most of my information I found was based on some other resources I found externally and this old thread on TFP - Filter and pump size for 24x52 round pool I decided to upgrade from the 18" filter to a 24" and upgrade from a...

I need to replace my failing pump. However, before I replace the pump I want to check if the sand filter installed by previous owners on my pool is adequate. If I need to get a bigger filter then I may need a bigger pump. Based on the research I have done, I think I may need a 21-24 inch...

Under normal circumstances, that wouldn't be an issue. I'm curious what should I do to pool prior to leaving on 2.5 week vacation when no chemicals will be added when I'm gone? the second part of my question is what is "the next best" option if I cannot find a store to purchase liquid chlorine...

Ok, so really you take average daily chlorine loss multiplied by the number of vacation days. Any concerns with bringing the chlorine level so high on a vinyl pool?

Yes, I typically test at least every other day, I just don't update the app each time. Numbers haven't been fluctuating. When I test again tonight, I'll be sure to update app and can repost.

I have been using liquid chlorine for my pool, however, I am having trouble finding it in my area and think I may need to change my choice of chlorine due to supply issues. It seems like some online places have their prices severely jacked up like Amazon ($23 or more per gallon). All the...

FC was down to 14 today, that cane down quick! It has been hot and sunny (low 90s in VA today). Hopefully be able to jump in tomorrow and get the floor cleaned up better...how frequently, under normal operation, do you typically have to add bleach? Based on slam process, I'm guessing it will...

Never thought I'd see the day! Passed the OCLT. Current stats: Cya - 25 (working to bring this up to 40) FC - 24.5 Cc - .5 When is it safe to get into the pool? Do I need to wait until chlorine level is below 10? I'm waiting for chlorine level to drop more before raising cya. Am I in the...

I'm in a similar situation with a pool that hadn't been opened for a couple years. I have been adding about 3 gallons of 8.25 bleach for about 3 weeks and have been seeing improvement this past week.

Regarding TFP method says for backwashing wait until psi is 25% above normal operating psi....Filter actually cleans a little better when slightly dirty...the idea behind it is clean the filter before the pump starts to lose efficiency Sent from my XT1080 using Tapatalk

Thanks duraleigh! I'll note to backwash at a minimum of 14psi Sent from my XT1080 using Tapatalk

Ok - I will make sure psi is at least 13 psi moving forward before backwashing. (Normal clean filter is 11-12 psi) Sent from my XT1080 using Tapatalk

Here is a pic of water this morning. FC measured 23, added enough bleach to bring it to 25 using pool math. Sent from my XT1080 using Tapatalk

Ok, POP it is - I've been concerned because of not seeing any changes in the water. I will take some pics and post. Normal pressure is about 11 psi. I have been backwashing daily. Wastewater is whiteish when I backwash and clear when I complete. I could be waiting to backwash longer as psi...

I hand answered all your questions....Yes I am running the filter 24/7 and have been brushing most days, I could do a better job brushing more. Sent from my XT1080 using Tapatalk

Good point. I actually was keeping fc between 22-25. It's been about 2 weeks into the slam although about 1 week since getting to proper cya range. I have not added the ladder and there is no algae in any piping. Sent from my XT1080 using Tapatalk

I have cloudy water and am not seeing it clear up - I believe my numbers are in the proper ranges after reading pool school info and have also deep cleaned the sand filter prior to opening. Filter is in good operation - no leaks or broken parts noted. I am unable to pass overnight loss test due...

Closing the pool for the winter. Also the pool does accumulate leaves as it is next to trees that lose their leaves.

Anyone have any recommendations or should I start a new thread?

Any recommendations on what type of pool cover I should buy for my 24 foot round ag?

thanks all! When is it recommended to vacuum to waste?

I do have a multiport on the Hayward S180T and have not been changing the multiport when vacuuming, I keep that set to filter and backwash once pressure is 18-20 PSI. After backwash, I rinse for 30-60 seconds and set back to filter. What is the sock technique?

UPDATE - any feedback is appreciated thanks in advance. Good News - Thoroughly deep cleaned the sand filter and lateral assembly has been replaced (standpipe was cracked all the way down to the laterals at bottom) this weekend. I now am seeing pressure changes when the filter gets dirty to...

lateral assembly kit ordered, thanks for the guidance!