Search results

I installed a Circupool Gen-15 cell to replace my dead Aquarite-Rite T15 cell. It had been working fine with a knock-off board for many years. These are the readings: -4.80 88-4 r8.80 3.50 22 24.9 7.75 100P Generating light on check salt and check cell are off.

Between the replacements of the Thermistor, the new boards, now it's the burn of the Molex 10 pin part with the same issue on the connector on the cell. I will not be able to solder this thing myself even if I ordered both parts. What would be the best option for a 27000 gallon pool?

0 87 31.1 .... not generating 0.0 100P -0 AL-0 r.1.40 Tested DC voltage on AB/CD right bottom corner : .025v Salt tested at 3000. Solid red light check salt and cell. Looked at cell, nothing wrong inside. CMARCHA40-2Y by Calimar, one year old. Thank you.

I have been brushing the pool with light algae but it seems that some are back at the bottom through jets. I vacuum it in the deep end using a canister with a bag, but I guess some is not stopped by the grids during the day. They might need be replaced. No DE comes out after backwash. What...

Numbers seem OK. I guess light might be bad. 3100 88 24.6 6.44 77P AL-5 r 1.40

Filling up the pool and noticed big bumps around jet, not flat at all. Normal? In the deep end (10ft), it seems that it was not easy to reach the bottom of tiles and create a nice line as opposed to other areas of pool. Far more plaster on the left side and poor finish on right. Can they sand...

Hello, Trying to figure out the best options to replace concrete slabs sinking around pool. Rain water ending up in back of pool area, decay of roots from removed trees? Slowly going down through years. The issue with concrete upfront was caused by water leak a few months ago, elbow broken for...

Worked fine for three days. Same issues again. No power/gener.. green lights. Could this part be bad after such a short time? The box takes a lot of sun during the afternoon, living in Houston, good idea to move it inside garage?

Need to change this cheap pump made in China which brought pressure in filter from 10 to 5 . Not a lot coming out of jets. The pipes are 2" wide reduced to 1.5" for fitting on pump. The 1.5 HP original Hayward pump used to run for 8h to 10h in summer. Would a 2 HP pump make a difference ? What...

Well it's time to replace this old metal D.E filter 60 sq/ft( Pac Fab Nautilus S Steel NS-60), rust and pinholes/salt water. The pool is around 25000- 30 000 gal . Looking at Hayward Star-Clear cartridge filters C900 or C1200. After a few phone calls, could not find an answer pointing to...