Search results

In addition to the spa JetArrays, we also have 3 wall scuppers and 3 water bowls on columns supplied by wall drains. And a chiller return that supposed to be mounted low in the middle of the pool. As we didn’t want any toe stubbers on the floor of the pool, we used another flush circle drain for...

Next was plumbing rough-in before Gunite. We had decided to include a couple of unique options in our build. First, the spa... we wanted some pretty strong therapeutic action for the jets and another builder had shown us the JetArray product. It’s hard to find much information about them...

Of course with tropical storms on the way and what would end up being 4 weeks until Gunite, we had the pool flashed to prevent cave-ins. Which turned out to be a good idea as we ended up with a half full pool...

Here are a few pics from the rebar stage... This was pretty much the easiest part of the build and where I didn’t have to stay on top of things. Although the last picture shows the loose soil I mentioned in the dig post earlier and became a source of frustration. again, I will reiterate. If...

Argh... I feel your pain as well. Was supposed to have plaster today. A plumbing issue has delayed my pool almost 2 weeks. I really need to update my build but I never have enough time. I hope you’re not in a holding pattern too much longer.

I hadn’t seen Dirks reply but looks like you have another vote to separate.

You would probably need to have 4 lights to make it work. Here’s the page from the Jandy light guide posted earlier... https://www.jandy.com/-/media/zodiac/global/downloads/sl/sl4572.pdf If I were to go this route, I’d probably put one at each gap between the stones, alternating right and...

On another note, our electrical rough in was completed Tuesday and the IntelliCenter and 4 transformers were delivered today. All 8 of the pool Microbrites homerun to the equipment pad in one large junction box. The other 2 runs for the landscape lights terminate next to the junction box and...

@cowboycasey your lighting looks fantastic. It reminded me of this crazy pool I remember coming across when I was searching for inspiration for my lighting... https://www.trendir.com/custom-swimming-pool-by-cipriano-landscape-design-beyond-amazing/ @PoolPaul I haven’t heard much about PAL...

That burning bush would be amazing in fall! My wife and I aren’t big into gardening up keep, and we’ll have less time with needing to take care of the pool and using it! Because we cut down so many trees (8 large trees, some over 80’ tall) our township requires us to replant some native...

All of the additional stone work for the patio and walls really helps tie in the waterfall well with the landscape and rustic appeal to your project. I have a similar plan to add a raised bed behind the raised wall on our pool but have much more limited space. What plants are you going with...

Thanks! Our pool builder had never done these before so it was quite the learning experience. He'll decide if we even tells other customer's about these depending on the performance compared to "standard" jets. The plumbing really should be installed during the steel rebar phase. They...

We installed JetArrays in our spa which have 4 inline jets which were installed vertically. After taking some measurements, we wanted the bottom jet to be at least 5.5 inches above the bench height. It was a chore to install, but so far it looks good. We’re still in construction phase however so...