I upgraded to a Hayward W3SP2603VSP pump and am having a hard time figuring out the settings to have it run at a set speed until I manually change it. Pump is stand alone, no automation. The way I read the manual if I set the start and end time as the same the pump would just continue running and not shut off. Last night it shut off with the timer set 12a-12a. What am I missing? Anyone share their settings?
New VS Pump - help with timers please
- Thread starter larrybbaker
- Start date
- Jun 24, 2021
- 16,845
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Set it to 12a to 11:59p
Or set overlapping timers:
www.troublefreepool.com
Or set overlapping timers:
Need help programming Hayward Superpump VS
I've read the manual, checked the Hayward website and youtube but can't find detailed instructions to set up my newly installed pump so I'm hoping that someone here can help me. I previously had a dual speed pump without any control panel to deal with. - How do I set it up to run 24-hours on...
www.troublefreepool.com
- Jun 7, 2017
- 10,002
- Pool Size
- 29000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
With Jandy they recommend setting a 5 minute break between stop and restart. Works great for me and I did have issues when it was the same stop/start time. There is no way to continuously run that I have found.
Also Jandy has a default or "Pool" speed where it automatically goes to when first turned on. Mine is set for 1500 RPMs.
Also Jandy has a default or "Pool" speed where it automatically goes to when first turned on. Mine is set for 1500 RPMs.
Thanks everyone. I think I figured it out. It appears if you set the same start and end time it turns off the timer completely and displays “off” so pump doesn’t run. Also the minimum increment seems to be 15 minutes so live with a 15 gap or set overlapping timers.