I recently had the two actuators replaced do to faulting wiring (the pool/spa main drain suction and pool/spa return actuators). When the new actuators were replaced on both the “spillover” feature that usually retuned water from the spa to the pool is now opposite. When I turn on the spillover feature the Jandy actuator actuates the pool/spa return water and return water to from the POOL to the SPA and NOT the main drain suction as it did before from SPA to POOL. The dip switch #3 is turned on as well. Could it be the actuators were placed in the wrong AUX on the iAqualink?
To give you some context of our pool and spa setup. The pool and spa are two bodies of water running on the same filter pump. They are on a schedule and alternate filtration on different times of the day. The main filter pump runs 24hrs per day and also adjusts RPM's throughout the day as well.
I hope all this makes sense.....
Pool equipment setup:
To give you some context of our pool and spa setup. The pool and spa are two bodies of water running on the same filter pump. They are on a schedule and alternate filtration on different times of the day. The main filter pump runs 24hrs per day and also adjusts RPM's throughout the day as well.
I hope all this makes sense.....
Pool equipment setup:
- Jandy Filter Pump - both pool and spa on same pump
- Jandy Heater for both pool and spa
- Jandy SWG for both pool and spa
- Jandy Actuator value on main drain/pool/spa suction
- Jandy Actuator value on pool/spa return
- Cyclone filter/Jandy pump for rain curtain
- Jandy pump for secondary water feature
