I've been using a metal strainer in my skimmer bc the basket was missing when we moved in and I could never properly identify the skimmer. I need to correct that and get the proper basket. Can anyone identify this logo? It is either a fancy "J", a fancy "P", or swirling water. Or can you identify the skimmer? Skimmer has 2 ports in the bottom, 1 is plugged.
Help me identity this skimmer or the logo
- Thread starter CountryBoy19
- Start date
reggiehammond
Gold Supporter
- Oct 4, 2020
- 2,260
- Pool Size
- 30000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Can't help with identification but I was in similar situation - just measured skimmer opening width and found numerous options on Amazon that all fit. Don't overthink it, I'd say.
I was hoping to avoid the hassle of the basket not measuring what it says online and avoid crappy fit... maybe I am overthinking it.
Are baskets normally measured at the outside of the lip that holds them up or the outside of the basket not including the lip?
I believe this is the same one. Or at least greatly in the right direction.
www.troublefreepool.com
ID a skimmer model with a conch on its lid and finding a float valve for it
I have a 20+ year old pool in my house that I have renovated. The main drain is connected to the skimmer and the skimmer to the pump. Currently, all the suction in my pool is from the skimmer, not the main drain. This is not helping much with filtering the plaster brushing since my pool got...
www.troublefreepool.com
It certainly appears that way! I actually looked at that one on inyo yesterday but it said it was for vinyl/gunite, I have a fiberglass pool. I'm also really ignorant about all of this. The pool is 23 years old, I've lived here 4 years and previous owner wasn't helpful at all (he wasn't just ignorant he acted on his ignorance and screwed many things up instead of getting help and advice when he didn't know what to do).I believe this is the same one. Or at least greatly in the right direction.
ID a skimmer model with a conch on its lid and finding a float valve for it
I have a 20+ year old pool in my house that I have renovated. The main drain is connected to the skimmer and the skimmer to the pump. Currently, all the suction in my pool is from the skimmer, not the main drain. This is not helping much with filtering the plaster brushing since my pool got...
They all work on any pool. Fiberglass pools weren’t that common back in the day so the original manufacturing specs/details probably didn’t list it as a choice.
