Recent content by Yetilagoon

Actually AUX7 is my water fill. I never changed the name when i set it up. The only circuit available that I assume I could change is the "jets" Could I possibly change the Jets circuit to Air blower? I have an air blower just dont know where its at in the screenlogic system exactly. When the...

I am doing all this from my phone and an Ipad because Ive never been able to get the desktop version on my computer. So here is what I am able to see. I really would like to just add the air blower to the spa side remote and be done with it.

Screen logic 8 Easy touch system with spa side remote. I'm having an issue with the settings. I added the spa side remote4 a while back. So, when I push the spa button it goes into spa mode and starts to heat up to my preset temp of 102. (good). I added jets to the spa side remote 2nd button...

Thanks Marty, The dilemma is it takes about 30 minutes to heat up the spa (I have it set to 100dg) If it's on an egg timer for 30 min it will shut off right about when it hits the set temp. (which now that I think about it may not be a bad idea) I figured 90 minutes was fair as most adults...

Well that worked like a charm. I tested every scenario and we're all good! I'm actually able to run the waterfalls features now too while in pool/cleaner mode. It's a manual valve that I thought was out of the question. Now I just need to set a schedule to run the spillway every night to...

I see wow. Thank you. Gonna test first thing in the morning. (y)THANK YOU!

Thanks for the pictures and help. What control "remotely" will I loose if I close the valve in the red square? Wouldn't I loose the ability to run the spillway? Or to cycle the water in the spa back to the pool?

I do have a SWCG. I will try this! Thank you.

That's interesting. I have screen logic 8. 20,000 gal inground pool with connected raised spa. With spillway function. So, find and adjust the valve that controls the trickle over the spillway in pool mode and cut it back so there is no trickle? Then I would be able to run the pool and cleaner...

I'm not really sure. When in pool or cleaner mode the spa water trickles over the spillway. When in spa mode it recirculates only the spa with no spill. I'm not really sure there is a solution to this as my whole system is run off of one pump. Unless there is a valve somewhere that can be closed...