Recent content by xaviergzz

  1. X

    new intex 22'x52'' setup

    Can you put up some pictures???
  2. X

    new intex 22'x52'' setup

    Jason, woulnd the 4x6 frame help out with the sand shifting and washing out? I das thinking about having the 4x6 be only about 1" above the ground and dig out the inside, then fill and pack about 2.5 inches worth of sand and use 1" thick pavers. That would get the pavers leveled with the 4x6 i...
  3. X

    new intex 22'x52'' setup

    Hi all... I have just purchased an intex 22' ultra frame. this is a replacement/upgrade from an easyset 15'. to start of I did not level the ground with the 15 footer. I plan to do that this time. I am thinking or creating leveling a 24 foot square area and use 4''x6''x12' treated lumber to...
  4. X

    Why i would disconnect the copper electrode

    JasonLion, can you tell me why i would disconnect the copper electrode? i had my water checked at LPS and here is what the readings: FAC 2 ppm TAC 2 ppm PH 7.6 TA 160 ppm CYA 20 ppm Calcium hardness 275 ppm salinity 3.7 (apples? the guy could tell me the unit of measure, he used an electronic...
  5. X

    Newbie SWG and copper plumbing question

    i have an above ground pool with a swg from intex, it also comes with a copper cell to produce copper ions, supposedly as an algecide, and the manual states to keep this at .1 to .2 ppm
  6. X

    Inground Pump For Above Ground Pool

    Quick (and maybe dumb) question... Can I use an inground pool/filter setup for an above ground pool? Thanks