Recent content by triciarn2002

Here are the pictures of my pool water. It’s taking less bleach to keep reaching. I’ve scrubbed and vacuumed several times. CYA 40, I’m getting my FC to 16 multiple times per day. CC 1, I’m backwashing sand filter when 25% over clean reading. Water is quite dirty that comes out. I’ve used a bit...

I will do this with DE. Thank you for advice

Hi Mdragger, This morning my FC is 16 which is still at target for my CYA of 40 if believe. CC 1, PSI after backwash was 13 which I did two days ago. Current PSI is 13. I can see down the side of pool walls about 1/3 of pool. Water clarity doesn’t look and better from last picture should I do...

I’ve been testing FC several times a day and bringing my FC back to slam rate of 16. The lowest I’ve found my FC was 14 but I get it right back up. Tonight my CC tested 1.5. Should I be concerned with this? I got an automatic pool vacuum and it did a great job getting tiny little things off of...

I’ve backed washed again today, PSI was 17, after backwash PSI 13. I’ve tested FC, it was 14 so I added the 54oz of 7.5% bleach. FC is at 18 now, a little above 16 target. I did remove solar cover, CC now 0.5. Here is a picture of the water 7 hours later. I think I see an improvement.

Thank you for advice. What does, “ cc’s can escape “, mean? Our weather is full sun today, should I pull cover off for the day?

Thank you so much for the quick response. I’ll stick with bleach and do everything else you said. I’m super motivated.

Hi experts, I would really appreciate your help and support. I have an above ground pool with a sand filter. 16,000 gallons. Sand was replaced last year. I bought Taylor K-2006 test kit. I have been trying to SLAM my pool clear. It’s still greenish blue. PSI this morning 20 with little pressure...