Recent content by stube40

Thanks sir - my pool equiment is in a shed so the smoke trick might have a better chance

Thanks everyone - I'll take a look this weekend and see if I can get to the bottom of it. I once saw a recommendation to use a 'smoke-box' to create smoke to diagnose the issue. In other words, use the smoek to see where the air is getting pulled in. Also, I'll check which grease I'm using -...

Thanks so much guys. Water level is right to the top of the skimmer box, about 10mm from top to be exact - not sure if that is 'right', but certainly not low. Interestingly though, the level is above the small 50mm round screw plug on the side wall of the skimmer box. I'm not sure what that...

So my pool just started doing this thing in the last few days that when the filter stops all the water drains out of the filter-system - the clear barrel with the salt element in it empties in a few seconds and you can hear all the rest of the water in the pipes disperse, then there is an...

Wow. Thanks everyone. If i had known how difficult Zeolite is im not sure i would ever have bothered with it.

My sand filter has 5 bags of zeolite in it and is only half full. It was originally about 3 quaters full with silica sand but zeolite is so expensive i didnt buy enough. Its been running for 6 months without issue but filtering is not quite as goid as i woukd like. Im thinking of topping up with...

I think you are 100% correct with the overflow. It is exactly where it should be for an overflow, roughly about 2 inches below the top. I'm fairly sure it will not have been plumbed in by the previous owners when the pool was fitted, hence the cap is on. That's for the tip about the smoke -...

That's a great tip - will try the running-hose troubleshooting trick. Unfortuantely my pool equipment is in my shed, so soaking the floor is a problem, but worth it if I can track the issue above ground! I big part of this for me has been learning the plumbing for my swimming pool. As far as I...

Oh man. That sounds really worrying! Could that be combined with excess water loss then?

This is driving me mad and, to me, it would appear to defy logic. I used to have a pool/system that would happily run an automatic cleaner (aka Baraccuda, aka Kreepy Krawly) on the end of an 8m hose. Now I have a system that hiccups, splurts and farts if fit a few metres of hose to the skimmer...

Thanks for that. When you say 'good quality sand'. What kind of sand are we talking? I did look at a few posts from TFP over the last day and most of them were comparing Zeolite to 'sand' without declaring what was meant by 'sand' - although on a few occassions it became clear that it was...

I'm not sure where I got that information from about algae living in the filter - it was in a forum whilst I was researching the Mustard Algae. I'm sure it must have been another forum though, not TFP ;-) That's interesting what you say about sand working just as well as Zeolite. I'm...

Hello TFP folks. I have been fighting a bad case of Mustard Algae for a few months now. I managed to get mostly rid of it after a SLAM, but it never truly disappeared. As it turns out, a leak in my fibreglass sand filter was causing filtering issues and has finally caught up with me now so I...

Thanks so much. I'm just about to go to the shop to buy chemicals and will work on the pH and CYA levels first before adding liquid chlorine. Just wondering though, is there somewhere on this site that will tell me what amount of liquid chlorine to add based my current FC level? Sorry if it's...

I'm about to SLAM my pool. I'm very new to the process having never done it before. I have a salt-water pool (details in sig), but I think my CYA/stabiliser level is virtually zero (probably not had any added in the last year). I have just received a good 'test-all' kit from Clear Choice Labs...