Recent content by Stevereno

Lost communication between the remote control and Aqualink control box. Tried the procedure to change the frequency channel using Channel Setup on the PDA and the transceiver "learn" mode switch. Did not get PDA message to take transceiver out of learn mode. The Transceiver unit "appeared" to be...

Nice work! :goodjob:

There are numerous discussion threads on this issue on EggHeadForum.com If you Google "too much smoke in big green egg" it will be right at the top of results. Check it out and see how others have resolved the issue.

Thanks for the compliments. We used Sullivan Construction (Mike Sullivan) out of Magnolia. We got 3 bids based on a very similar pavilion sold through Home Depot. I handled the staining myself, used a product called Ready Seal. Since the pavilion and deck are made of cedar and there is no...

For you guys wanting to know about cleaning your BGE grills, I assume the Grill Daddy would work as well for that as it does for my Bull stainless grill. Fill it with water, turn the valve to On and lightly scrub the grills. It steams off the caked on residue like you wouldn't believe. This is...

I live NE of Houston in SE Montgomery County. My pool only gets a few hours of direct sun due to lots of tall trees on the south and east sides so the highest temps I see are around 78. The downside to that is that the pool warms up later in the spring and cools off earlier in the fall. Water...

Very nicely done! :goodjob:

I looked at his site and that was probably a good call getting his input on it. Is he making your grill? Looks like he makes top quality stuff.

The OL will be as good or better than last year's which was pretty salty. The offense will probably have a little better balance between run and pass. Defense and specifically the front 7 are the big question mark that will determine how far the team goes this year but I am hearing some really...

Not an expert on that type of grill but I would be leery of an enclosure other than masonry for one of those. Steel studs should be plenty strong at 12" centers, they will bear a lot of weight, but I don't know about the heat issue. If you notice pics of these online, it seems the vast majority...

Yes, how will these be used, what will be connected to them, etc.?

Something is out of whack in your drawing. If it is 80 inches from the stairs to the corner on the one end, I don't believe it is 14 feet wide on the other end. Maybe more like 10-11 feet? The length doesn't look anywhere close to scale when looking at the 5 foot square table. That being said...

Good choice! I think you will be happy with that location.

Good to know!