Recent content by SteveNJ

Well I replaced the pcb and it's generating chlorine again! As an added bonus, it's dead silent when running now. The panel used to vibrate when it was generating and you could hear it from 20 feet away. It's done that since the day it was installed. With the new pcb it's so quiet that I had...

JamesW, I tried removing the display board and reinstalling it. Worth a shot but unfortunately it didn't help, so I'm guessing the pcb is shot. HQPools, The cell is 2 years old, but the system is about nine years old. I just ordered a replacement pcb. It didn't cost as much as I thought it...

JamesW, I had tried resetting AL-8 back to AL-0 but it wouldn't change. But I didn't try resetting the display first. How do I reset the display? Thanks, Steve

That's the way I'm leaning. Fortunately the price of a new board isn't as bad as I thought. And thanks for the reminder to chlorinate with bleach. It should go without saying ...but I already forgot today!!

My Aqua Rite stopped generating chlorine a couple days ago. The power light comes on, but no other lights are on. The no-flow light doesn't blink when starting the pump as it normally would. Here are the numbers- 2500 82 30.2 0.00 50P 0 AL - 8 r1.40 The chlorine ppm display was reading 2900...

I have a Dolphin Dynamic that worked great for six seasons. This year, the motor on the side that the cord goes into will only run counter clockwise. After about 5 seconds of the motor not turning clockwise (while the other side's motor and the vacuum motor are running fine), the robot shuts...