Recent content by SampleUser12

Yessir, I got in contact with Hayward and they told me that the older AQL-CHEM system did not have a compatible “ID ADDRESS” that communicates with any Omni systems. If anybody has any questions about the OmniPL please let them know to ask me… I pretty much know this system inside out now since...

I think you are absolutely correct, my system is the AQL-CHEM for the older ProLogic. I guess i am going to have to shed out another $800 or so on the new OmniPL compatible HL-CHEM system. Thank you so much for your help, it’s greatly appreciated!

I believe the issue is what Peiloy stated. I do have the AQL-CHEM model sense and dispense for my old ProLogic. It’s probably not compatible. Thank you for your help though, I really appreciate it.

How can I do that? I can only get the relay (HVR8) to turn on in “service mode” by overriding the High Voltage Relays. Otherwise, on the regular configuration screen it’s already set to on but it does not turn on unless I override it on “service mode.” On service mode I still can’t find the...

Hello, I currently upgraded my Hayward ProLogic to OmniPL. I noticed the new OmniPL board does not have a direct connection for the black/white wire like the older ProLogic had. I read I’m supposed to wire the black/white wires to a new relay, which we did, exactly as the instructions...

Yessir, will try that! Thank you so much for your help.

Ok yea I think it’s the lights… so installer had an old Pentair Intellibrite LED Pool light and hooked it up on the same relay with all the other lights together and it worked perfectly! Not only did it work perfectly but all the colors and shows worked as well even though it’s hooked up to the...

Ok he removed the relay and wired the lights directly to the line side and the exact same thing… they turn on 10-15 seconds on that purple color and then shut off.

Thank you. We will try that.

Here is a picture of the panel and wiring if it helps. I have a transformer that was there previously, but the lights are 120v…

Also installer wired each individual light by itself and they do the exact same thing… turn on for 10-15 seconds on violent/purple color, then turn off… did it to all 4 lights and all did the same thing. Programming issue? Bad board? He programmed and reprogrammed over and over and nothing.

Ok installer checked the power to the lights and it clearly shows 120v when powered on. When the lights shut off by themselves the reading is still 120v… which makes me believe the issue is with the lights themselves.

???

Yessir, I was thinking the same thing.