Recent content by rpputney

Hi Mark, Your advice worked! I have a neighbor that owns a manufacturing company and I gave him a drawing of what we wanted to do. We added a 1" long x 1/2" diameter pvc plug cemented into the end of the jet orifice and then put it on a lathe and drilled a hole to your 5/16" recommendation...

That makes sense Mark. Is there anything we can do to optimize the plumbing setup better? I did buy a new Pentair SuperFlo 340042 SF N2 1A 230V pump that is not in use. That wouldn't help to add that pump in to change the plumbing I assume. I did a little searching and didn't find the 5/16"...

Hi Mark, The jets worked okay in the past with a both water mixed with venturi air bubbles. We never used the spa with the air valve turned off, so it is hard to compare the old and new water flow. Now we only have minor air mixed on 3 of the jets (2 on the left side and 1 on the right side)...

Hi Mark, the spa jets did work before the reno. These plumbing changes were part of the reno: 1. new heater (replaced old RayPak that had rusted out) and plumbing (see pic) 2. added a Jandy valve programmed feature for 2 sheers (had manual valve before) 3. replaced auto chlorinator (same...

Hi TFP, We did a renovation on our pool and the PB/Restorer left our job incomplete. One of the items that we need to fix is the 6 venturi jets in the spa. We have a 30,000 gallon pool with a 9' deep end and and an attached spa as pictured here. The spa has a venturi on each end (2 total)...

Thank you for your replies. Contractor is installing lights right now.

Hope someone can help me with a question that has come up with our 20 year old pool renovation. It has been an extremely drawn out process. If we didn't stand to loose thousands of dollars we would fire our current renovation company, but we are too far into it. At this point I don't know if...

Wow, what a beautiful pool! If you could post some more pictures with you chemicals stabilized that would be great!