Recent content by Rooster76

I have the same pool and run a intex 2500 gph pump on mine it is a intex 633t it does awesome

I have high salt I added what it said 125lbs for a 5061 gal pool. I used HTH salt test strips and the ppm is at 2880 the book says from 2500-3500 with 3000 being optimal but I am getting a high salt alarm the SWG is only 2 weeks old. Results Th 100 Fc 0 PH 7.5 Ta 80 Cya 30-50 I just don't...

Well I am a happy camper the frogs are gone moth balls did the trick and my pool is clearing up I can actually see the bottom still cloudy but with slamming it 2x its working and all my levels are good so its coming together and my daughter is happy Thanks so much for all your help

Got up this morning went and checked on pool to see if it was clearing any and found frogs and thousands of eggs what do I need to do please help

I just added my info to signature

Last night I checked my salt level and it was at 1910 so I added 1 bag and mixed it up good then ran the pump and SWG then aboutba hr later got a high salt light checked salt today after running pump only all night and today now my reading is at 2880 gonna check again tomorrow to see how it is...

I am just starting doing the swg. The book says I need to set my 5061 ag pool to 3 hrs and I have the pump for hrs. The filter pump will turn on and off every 4 hrs so with these set this way the SWG and pump should both be on at the same time I believe the SWG will run for 3 hts every 24 hrs...

At this time with the dead alge I can't run it more than a couple hrs with out the flow cut off alot and get a alarm on my SWG

I just bought some intex type B filters just trying to get my pool clean and having alge problems but these intex filters are clogging up way to fast I had some sommer escapes from last yr and they lasted a lot longer just can't get them clean anymore so I bought these filters and they are not...

After I got back from work to my surprise no floating dead alge. Now to start my new SWG the book says to run it on boost but I have seen people say not needed I am starting with pretty new water except for about 150-200 gallons I put in 120 lbs of salt let it run on pump only for 24 hrs now...

Thanks y'all idk what to do about this

I do have a skimmer I have been using the dip net but when I got up this morning the whole top was covered I hope this won't last much longer. So if I get pantyhose do I just cover the outside of the skimmer basket or what

I am trying to get my above ground pool 16× 48. Ready and I have dead alge floating and can't seem to get it to cleaned up. I am staring the process of switching to a salt water generated system. I don't have a way to do back wash what is the best way to clean this up without going through 10...