Recent content by Rone

I'm not sure what power it's wired for. The Jandy controller for all the pool equipment went bad. I called the company that installed my IntelliFlow pump and they were able to replace the board and get it covered by the warranty. This was also the builder of my pool back in 2001; Mission...

Well it's been about 3-months now and the Aqua-Rite has lost all power, no lights, nothing. I noticed some other posts that say this is a common problem. The component repair works fine for a month or so and then the board craps out completely. I did see there was a yellow wire burning issue...

I had the exact problem and just fixed it a few days ago. The circuit board current limiter replacement really worked. I'm not a solderer so I took the board and component I bought from Digi-Key to my local Radio Shack and they soldered to for $10. Everything's working great now.

TFP definitely helped me resolve my power problems with my Aqua Rite chlorine generator. I found some older posts that described my problem and pointed out a component that goes bad on the circuit board. I looked over my board and found the round, quarter-sized current limiter component and it...

I did all the cleanings, switched the flow sensor, reset the meter; everything everyone recommends on other posts on the same system except change out boards. When I thought about changing boards I decided I'd get some other system instead; like the Pentair. With the new cell everything is...

I thought I'd give you an update even though no one had any comments so far. I ordered a new T-15 cell and everything is back to normal. The salt reading is accurate and the cell is pumping out chlorine. So if anyone else is having this trouble with a 4-year old cell it might be time to...

My Aqua Rite chlorinator is giving me fits. The salt meter is stating 2300 ppm and that is incorrect according to a pool test with salt strip reading and a calibrated salt meter reader. I’ve changed out the flow sensor and T15 cell to the old ones I had in 2008 and get the same readings. I’ve...