Recent content by robo32502

I'm trying to see if the globrite light colors can be changed via the app when using the IO relay board in the intelliflo3 pump. Or do I need ro get the color sync switch also?

Do you put freeze protection on both pool and spa mode? Or just pool mode? I've seen threads where people say the actuators will rotate between pool and spa, but it's not clear if both have freeze mode on. Thanks

We recently moved and are having a new pool put in. The plumbing was completed last Tuesday and held 20 psi for 4 days. Gunite was shot Friday and pressure was still 20 psi at the end of the day. We went out of town and returned today and the pressure dropped 4 psi. I think this is normal...

Sorry for the delay, I've been out of town. I have 3.03 on the pump firmware.

I don't see device. I do have software rev. And the uoc is 2 190

I have an intellipro pump and it periodically loses communication with the easytouch. If I turn the pump breaker off then back on it seems to regain connection. Any thoughts in this?

Cya was 40. Right now my salt cell is set at 30%. I'm just confused why it would leave a slight white residue on my fingers when I rub it.

Not losing water. I've done the bucket test a few times and the levels change the same amount.

Ph 7.2 Fc 1.0 Cc 0 Ta 50 Ch 240 I also noticed this hairline crack on the floor. It's straight and clean, maybe something scratched it.

I had my pool built in July of 2022. I have noticed that since the temperatures have dropped, my plaster will dust and has a slight paste feeling to it if I rub it. The water is clear and there are no visible problems with it. I'm wondering if rhus is normal since it is less than one year old.