Recent content by remoking

so, I did my weekly water test and CYA reading came out less than 30. typically, I would buy granular stabilizer from Amazon, but before I do that this time, do any of you recommend a better CYA liquid solution or CYA product that has worked best.

Can you plz expand on soaking the filters, what do you mean by that, I generally power wash with hose.

Here are the latest pics

Day 5 - 6 update: No algae, water is clear but still milky and FC has been above target levels.

understood, thank you Marty

Ok, for my pump motor, the typical or recommended pressure is 8-10. Throughout the SLAM process the pressure was always in the range 8-10. Is there a day range for milky water to clear on its own, i.e. 2 to 3 days or a week. not sure if I'm asking for something that doesn't make sense.

Do you recommend cleaning the cartridge filters every day, now that I don't see any algae and water is milky/cloudy taking time to clear. I cleaned the filters last evening.

I've 4 catridge filters. I didn't clean the filter except for once, may be that's what I need to do. I'll clean the filter.

Day 3 update - FC level is above target SLAM throughout the day. Water is cloudy, not clear. But don't see any algae or green surface.

Oh sorry, I should've been more clear. 1) No I did not replace the water 2) Yes I read the SLAM instructions and keeping the FC level above recommended levels. As a matter of fact, I added a bit higher than recommended since I knew that I wasn't going to be able to test last night. 3) I didn't...