Recent content by Packfan

  1. Packfan

    My Aqua Logic (AQL-PS-8) keeps going into Service Mode when running Aux 3 Edge Pump

    The local keypad is what goes into "Service Mode". I could take it off and perhaps spray some electronic contact cleaner on it. Though with the issue, I was not pressing the keys, as the Edge Pump is scheduled to run for 15 minutes each morning, and it is during the scheduled run, that the...
  2. Packfan

    My Aqua Logic (AQL-PS-8) keeps going into Service Mode when running Aux 3 Edge Pump

    I would like to add, I switched my Edge Pump from Aux 3 to Aux 6, and the pump now can be run via timer, or manual, without tripping the Service Mode. I did notice also that with the Edge Pump removed from Aux 3, I could still switch Aux 3 "ON" (though nothing to run), and the Pool continued to...
  3. Packfan

    My Aqua Logic (AQL-PS-8) keeps going into Service Mode when running Aux 3 Edge Pump

    Thanks, that is a good tip. I do have Aux 6 available. I will move my Aux 3 Edge pump to Aux 6 and see how it reacts. thanks
  4. Packfan

    My Aqua Logic (AQL-PS-8) keeps going into Service Mode when running Aux 3 Edge Pump

    Hello, problem with my Aqua Logic pool, uses AQL-PS-8 controller. My Aux 3 relay runs an Edge Pool pump. Recent problem now is when the Aux 3 runs (either via timed schedule, or when run Manually), the system shuts it down and goes into Service Mode. I can successfully run Aux 3 pump while in...