Recent content by Nickr

Thanks Sean for your reply I have been away and today is the day I was able to some more checking. I removed the tri sensor cable from the DIG 220 box and used a jumper to jump the red and white wire at the main unit. the results no change. It still indicated "check flow" With that there is...

Thanks Poolsean I have checked the by pass valve and it is working. I checked visually and I disconnected the tri sensor cable and jumped pins 1 and 2 (red & white) display still read an error "check flow". I also disconnected the tri sensor cable at the main unit and used a meter to check...

Thanks for the info. I checked point to point on the tri sensor cable and all checks out. All have continunity. I removed the tri sensor and inspected all six pins, no ploblems there. I had the chemistry checked just in case if it was so far out, the pool pilot shut down. All chemicals are in...

Thanks for the help. I have double checked the flow switch and it is working with the pump on. Getting enough pressure. Checked all fuses. I noticed that when I go into Test System I am not getting a reading for salt. It is reading 00ppm. Don't know if this is the problem. A few days ago I had...

New to the site. From what I have read... alot of info. I have a Pool Pilot DIG-220 with the check flow flashing. There is no blockage any where. Took the tri sensor out and checked the flow switch and it is working Any help is greatlly apreciated. Leave in Florida cell is #48. Thanks