MSchutzer's latest activity
-
MSchutzer replied to the thread Jandy Aqualink Problems! I'm 99% there!!.I found a brochure on the various different versions of the Aqualink systems and your model RS-2/14 Dual is meant for systems that have... -
MSchutzer replied to the thread Jandy Aqualink Problems! I'm 99% there!!.I’m not sure what the non Combo system reports on that help screen. I know that @PoolGate has a non-combo system, maybe he can check...
-
MSchutzer reacted to mattorola7's post in the thread How do I configure new pumps on a Jandy Aqualink RS-4 Combo when I have no remote? with
Like.
Hey @MSchutzer it was your post here that lead me to consider purchasing a Century EVQ225 based on your success with the thorough... -
MSchutzer replied to the thread Jandy Aqualink Problems! I'm 99% there!!.You mentioned Aux's B7 and B8, I assume this means you have at least a 16 function system? Where are your Intake valve and Return...
-
-
MSchutzer replied to the thread Jandy Aqualink Problems! I'm 99% there!!.If you want the pump to stop while the valves are changing you need to enable the PumpLockOut in the system setup menu. If the pump is...
-
-
MSchutzer replied to the thread How do I configure new pumps on a Jandy Aqualink RS-4 Combo when I have no remote?.It’s good to hear that you were able to get the new motors with Century Connect working with the Aqualink system. While the...
-
-
MSchutzer replied to the thread iAquaLink Schedule Acting Weird.I haven't ever tried to schedule stuff for single days so I can't comment as to whether it works or not. Here's an old thread that...
-
Mark, Thanks so much. I had seen that post before, but a) was kind of intimidated by it initially :), and b) not sure if it applied...
-
MSchutzer replied to the thread VGreen motor VL100 Automation.Chris, See this post and thread for info on enabling Jandy’s RS-485 protocol on the Vgreen 165 motor. Post in thread 'Century (Regal)...
-
MSchutzer replied to the thread VGreen motor VL100 Automation.The Vgreen 165 does have four digital inputs that can be controlled by any 3.3 volt or 5 volt logic signals. You can program the...
-
MSchutzer replied to the thread Intelliflo VSF 3 Running at Higher Speed than Program.You might also try and set the filter/pump run times so they are contiguous through a single day, and not wrapping around a day boundary...
-
I use Device Run Time which is linked to One Touch. I set up One Touch for Cleaner then I set Device Run Time for the One Touch Cleaner...
-
MSchutzer replied to the thread Device Runtime in Aqualink.While I haven’t used “device runtime” it does have some limitations as to what it can be applied to. See page 25 of the iAquaLink...
-
-
-
MSchutzer replied to the thread Jandy Laars LT Boot Up Symptoms - Which part most likely needed to repair?.I have the LX version of that heater and mine has a single speed vent fan. I would be surprised if the LT version doesn’t have the same...
