mmcwhorter's latest activity
-
mmcwhorter replied to the thread Confusing Pump Issues Unexplained.And the only leak on the supply side is out of one of the Never Lube" ports. It's pretty slow. I already bought the parts to remove them... -
mmcwhorter replied to the thread Confusing Pump Issues Unexplained.Yep, I was already thinking about posting pics...and for sure there are always bubbles up against the top of the lid when it's running...
-
mmcwhorter replied to the thread Confusing Pump Issues Unexplained.I am opening ONLY two wall skimmers for suction from the pool. The deep-end suction is closed ....and also so is the Spa suction. In...
-
mmcwhorter replied to the thread Confusing Pump Issues Unexplained.I agree. About 3 weeks ago I replaced the pump skimmer gasket...and greased it. The old one was not cracked but it appeared to be...
-
I am seeing two very odd things with my pump-fliter system this year...and I am at a loss after some small degree of troubleshooting it...
-
mmcwhorter replied to the thread Optimal Salt Level for SWCG.As long as the water is above +65F, I have seen IC-40 produce between 2800 and 3800. My unit says 3600 is ideal. At low temps I have...
-
mmcwhorter replied to the thread IC-40 SWG Reads Low Salt at 3200 ppm?.As an update, all is good. Pool water up to +70F since we finally got a little warmer weather...most mornings had been in the +43-45...
-
mmcwhorter replied to the thread Accidentally lowered ph too much -- do I need to fix or can I wait?.InvaderZim: I highly recommend you buy a TF – 100 test kit and follow the links and YouTube instructions posted above. By that time you...
-
mmcwhorter replied to the thread IC-40 SWG Reads Low Salt at 3200 ppm?.well, I decided to do something "wild and crazy": I added salt to take it from 3200 to 3600. Why? The manual said salt reading was...
-
mmcwhorter replied to the thread Dealing with mud run-off over winter.I’d start thinking about excavating some kind of a mud barrier.
-
mmcwhorter replied to the thread IC-40 SWG Reads Low Salt at 3200 ppm?.11 AM: Ran the spa closed loop from +54 up to +74. SALT light stayed red. Powered off the entire system, and removed the 4-pin connector...
-
mmcwhorter replied to the thread IC-40 SWG Reads Low Salt at 3200 ppm?.I think I am still in diagnosis mode. See the temperature plot from last night's test in the pic. I powered the pump on around 6:45 PM...
-
-
-
-
