MLG0303's latest activity
-
MI'm so lazy that if I was in the Olympics, I'd come in 4th, so I wouldn't have to walk to the podium.
-
MI run mine at 1500 RPMs because we like the look of the water moving a little more and the bump to 200W is no biggie. That's higher...
-
MIt depends on the pump and if you have automation. Most pentair pumps (without automation) have 3 speeds / times you can set. I tend...
-
MYou must be my brother from another mother... :mrgreen: :goodjob: Jim R.
-
MThe skimming struggle is real. You just know that the wind will start up 20 mins after the pump shuts off, and 12+hours is a long...
-
MRunning 24/7 keeps the water moving continuously, moving the chemicals to all areas all the time, less dead spots waiting for water...
-
MI'm in the same camp as Jim @Jimrahbe I had a Hayward EcoStar that lasted almost 10 years. I attribute that to running it 24/7. Many...
-
MYou will find that lots of the pool industry and owner actions are stuck in the past. 20 years ago when you had single speed pumps...
-
MPump motors are made to run continuously. Starting and stopping is hard on them. Running at low speed saves $$$.
-
MMLG, I have a saltwater pool and you have to run longer to generate the amount of chlorine the pool needs.. I like making a little...
-
MJim, Curious - why do you run your pool 24/7/365? My understanding is the "normal" schedule is something 6- 10 hours per day depending...
-
MMLG0303 replied to the thread Pool Quote Melbourne Florida.PS, Thank you for your feedback! Pool volume is around 12 - 13,000 gallons. So IC40 sounds sufficient. I will look into your filter...
-
MMLG0303 replied to the thread Pool Quote Melbourne Florida.AH, Thank you for the good feedback! I will take your suggestions into consideration.
-
MHi All, First time pool purchaser here. Thank you all for the wealth of information you provide here. We are in talks to install a...
-
