Recent content by meow_meow

It is a newer pool - about 6 months or so. How do I flush the pipe - I’m guessing just turn the spa jets on? I don’t want to assume tho. Thank you.

There are 6 jets in out raised spa. Five are working normally and one is struggling. Any thoughts, ideas, tips?

Ok. I think I found a thread with a YouTube video posted for OmniLogic. That being said, if you have any other info on where to find it specifically, I’d appreciate it. I didn’t see anything in the physical manual that I have for the system, unless I missed it.

Bumping this thread. Pump turned on and primed this morning - then runs for less than 30 seconds and shuts down. OmniLogic. Phone shows alert “FlowSensor: No water flow FlowSensor” We have a salt system, BUT it is running on just chlorine. We have it running like this for months now. Nothing...

Yeah, not happy about it. They are offering to acid wash the entire pool - the plaster color hasn't been great either. Lots of streaking. From what I’ve read, an acid wash isn’t a good idea on a new plaster job tho. Dunno. I kind of don’t care tho as I can see work needing to be done down...

I appreciate your comments. I’m unsure how I’m going to be able to get my builder to go thru with when at this point; they don’t have a proposal for the tile or coping. Suggestions? Especially when they likely refuse to do these things?

So you’re basically saying if the builder won’t agree to remove the tile and coping in their dime, to just foot the bill ourselves for self-assurance?

No, they are not chipping all the plaster out. Just in the area of the crack.

Should we let go having the tile remove and the coping at this juncture and just allow them to move forward with chipping out the plaster? What are the chances there would NOT be a crack at the plaster area where that crack is but there would be at the top (bond beam area where tile and...

Some updates: I feel we are at a bit of a stalemate. Builder is proposing to chip out the plaster and repair the crack. They have stated they are not worried about further issues due to the depth of the crack (we obviously are). They have stated that if there is a crack to the shell, it will...

@JoyfulNoise & @JamesW, I sent you both PM’s - I’d appreciate if you could take a peek at them some time. Thx.

It was done with the auto fill off. But thank u for mentioning it.

Just a couple of clarifying questions: hypothetically, let’s say the builder takes (or wants to take) an easy course of action for this issue and doesn’t make a determination that there are cracks to the shell and beam. Does that leave me to their mercy then? What recourse could I have...

So, let me preface this with 3 things: 1) My contact with the builder who I have dealt with all along has been great. 2) I have a tendency to not trust people when money is involved or mistakes are made. I’ve found it to be human nature for many to minimize their responsibility or to do the...

Sadly, here I am. I’m so upset after spending so much money.