Recent content by mchartra

Hey gang. Somehow, my bottom drain cover screws fell out and I cannot locate them. There are 4 screw holes on the cover but according to the manuals I found, it appears only 2 screws are used to secure the cover? I looked at the 2nd drain (I have 2 at bottom) and only 2 are present there but...

OK -I am an idiot... :oops: After re-building the heat exchanger and putting the parts back together, the wiring harness draped over the manifold and then I plugged everything back in. It's not until this morning, I decided to clean up all the connectors and re-trace the wiring that I...

Ah - yes -thanks -must be that Hayward's board works on DC while Pentair is AC - the Board is definitely 24VAC. Thermistor disconnected reads per the chart. Not exactly sure of the current reading, but I've tried 3 different thermistors (in case one was bad) and they all check out unconnected...

JamesW - Thank you and apologies - good point in terms of keeping same issue within same thread. Duly noted! Just measured the voltage with it running. 2.093 V (AC -True RMS) -which looks like 91deg according to the chart but I can tell you the pool water is definitely not that warm. :( My...