Recent content by mbking

  1. M

    Pentair i9+3 Comm Issues

    I will definitely post some pictures of the breakdown of the Spa Command. I don't expect there to be much left of the case when I finally get to the board. They go to all this trouble to seal the rear of the board, but the membrane they use is fragile and that's what lets the water in. I'm...
  2. M

    Pentair i9+3 Comm Issues

    Hello Jim, I became a Silver Supporter a few weeks back. I was happy to contribute and can hopefully do more down the road. Thanks for work you guys do on this site. Mark
  3. M

    Pentair i9+3 Comm Issues

    I've been bouncing back and forth between projects, but I can finally declare this one complete, well, mostly. I never got an estimate from a pool company to come do the repairs, but I suspect based on the other posts I've seen and past experience, this repair would have cost us in the area of...
  4. M

    Pentair SpaCommand Disassembly

    Has anyone successfully disassembled their Pentair SpaCommand Control Panel so you can get to the circuit board. Once removed from the mounting plate and the cable plug removed, there is a clear plate that covers the circuit board and 4 screws that appear to hold that board onto the front...
  5. M

    Pentair i9+3 Comm Issues

    Jim and Tom, I really appreciate all the input. I can definitely check the wiring out and will do that before buying a new motherboard. This board is a great resource and I will be making a donation. Again, thanks, Mark
  6. M

    Pentair i9+3 Comm Issues

    Jim, Single speed Sta-Rite Max-E-Pro Series filter pump. We have a pool/spa setup. Two control valves with one filter pump. There is also a heater for the spa only and two additional pumps for water features. All pumps are single speed. Mark
  7. M

    Pentair i9+3 Comm Issues

    I have a Pentair i9+3 Intellitouch system with 2 wired remotes; the Intellitouch Indoor Control panel and a SpaCommand panel next to the Spa. The Indoor Control panel has power, but will not communicate with the system. The SpaCommand panel displays ERR. I disconnected both panels and...